WLS550 pulley type wire drawing machine for Sale
WLS550 pulley type wire drawing machine
- Feeding wire diameter: 6.5mm,
- Outlet wire diameter 2.5mm,
- Finished line speed: 320m/min,
- Motor power: 18.5-15KW,
- Drum diameter: 550mm,
- Control mode: frequency converter to adjust speed
Product description
The wire drawing machine reduces the diameter of steel rods to create smaller diameter wires. The pulley-type wire drawing machine is a non-slip, dry machine that can continuously accumulate wires. This model has a simple structure, is easy to operate and maintain, and has a long service life.
The WLS550 model is a wire drawing machine that operates at high speed and low noise levels. It can draw various grades of metal wires, including SAE1008/Q195 and SAE1006/Q235.
The working process
The wire drawing machine consists of two parts: the drawing and coiling parts. The drawing part comprises the drawing wheel, holder, and drawing mold. The wire passes through the drawing mold and is wound on the drawing wheel. The coiling wheel provides traction tension to the wire while both wheels are in motion. The wire is pulled through a drawing wheel under tension, causing it to pass through a drawing mold and gradually decrease in diameter. This process results in wires of varying diameters.
Technical parameters
| Inlet wire dia | Outlet wire dia | Motor Power | Weight | |
|---|---|---|---|---|
| Single drum | 6.5mm | 6.0 mm | 15kw | 0.7ton |
| 2 drums | 6.5mm | 5.2mm | 26kw | 1.4ton |
| 3 drums | 6.5mm | 4.6mm | 37kw | 2.1ton |
| 4 drums | 6.5mm | 4.0mm | 48kw | 2.8ton |
| 5 drums | 6.5mm | 3.4mm | 59kw | 3.5ton |
Technical parameters:
- Feeding wire diameter: 6.5mm.
- Outlet wire diameter 2.5mm.
- Finished line speed: 320m/min.
- Motor power: 18.5-15KW.
- Drum diameter: 550mm.
- Control mode: frequency converter to adjust speed.
Wire drawing machine maintenance:
- Before starting each time, add lubricating oil regularly and in fixed quantities. The oil should be clean and free of sediment.
- The machine tool must always be kept clean, and the unpainted parts must be coated with anti-rust grease.
- The motor bearing’s lubricating oil should be regularly replaced and filled, and the electrical components should be checked periodically to ensure regular, safe, and reliable operation.
- Regularly check the V-belt, handle, knob, and key for damage. Replace them promptly if they are seriously worn and report any need for spare parts.
- Regularly check and maintain the switch, fuse, and handle to ensure reliable operation. Lubricate and clean the machine tool 10 minutes before each day’s work.
Frequently Asked Questions (FAQs)
The WLS550 pulley type wire drawing machine is a non-slip dry wire drawing machine that reduces the steel rod into a smaller diameter wire. It’s praised for its simplicity, easy operation, and longevity.
Typically, industries that require wire drawing, particularly in the nail-making industry, would find the WLS550 machine beneficial.
Some known parameters include a feeding wire diameter of 6.5mm, outlet wire diameter of 2.5mm, finished line speed of 320m/min, motor power between 18.5-15KW, and a drum diameter of 550mm.
The operation of this machine is via a frequency converter to adjust speed.
Regular maintenance includes oiling before each start, cleaning on a routine basis, and performing routine checks of all parts and electrical components.
